CAD/CAM软件操作

CAM350 Ver6.0热键定义使用

Key 热键

Function功能.

Associated Macro Command相关宏命令

A

Aperture table光圈表

C

Zoom close放大鼠标邻近范围

view_close@

D

Set active Dcode选择要使用的D

setdcode@ ##=Dcode number

F

Toggle fill mode显示填充模式(filled/outline/centerline)实填充、外形线、中心线

setvmfill@ #0=centerline, 1=filled, 2=outlineview_redraw@

G

Turn graphics on/off(speeds up edit selections) 图形,快速选择编辑

view_SuppressGrphcs@ # 0=on, 1=off

H

Highlight active Dcode将当前D码高亮显示

Hilite_dcode_on@ Hilite_dcode_off@

K

Turn layer(s) off (inactive) 将指定层删除(非当前层)   

layer_kill@ Must be followed by edit_layer@ 0,-2,-2,0,1 layer number, draw color, flash color, layer type, 1=off

Turn layer(s) on (active)指定当前层

layer_set@ Must be followed by edit_layer@0,-2,-2,0,0 layer number, draw color, flash color, layer type, 0=on

M

Toggle command line (memory used/command prompt/macro command职在指定在线命令模式 (使用记忆/命令提示/宏命令)

 

 

N

Toggle active layer negative/positive (display only)当前层反相显示

view_NegateActiveLayer@ # 0=Negative, 1=Positive

O

Toggle orthogonal snap (0/45/90 degrees)改变走线模式

setortho@ # 0=90, 1=45, 2=0

P

Zoom previous显示图形上一次大小

view_previous@

Q

Query all data讯问所有图元属性

query_all@

R

Redraw重画屏幕

view_redraw@

S

Snap-to-grid on/off光标按网格移动开关

setgridsnap@ # 0=off, 1=on

T

Transparency on/off透视显示开关

setvmtrans@ # 0=off, 1=on

U

Undo恢复

undo@

Ctrl U

Redo重做上次操作

redo@

V

Grid visibility on/off网格显示开关

setgridvis@ # 1=on, 0=off

W

Zoom window (must select 2 points)

框选显示,必须选择两点

view_window@ For example: view_window@ axy@ 1375.0,5350.0 axy@ 3300.0,3175.0 back@

X

Toggle cursor光标模式 (target/cross-hair)长短十字、交叉

Y

Layer table层表设置

Z

Object snap on/off目标选取框开关(以光标为中心)

setsnap@ # 1=on, 0=off

F1

Context-Sensitive Help

F2-F9, F11, F12

User-Definable keys

Home

View all显示全部图形

view_all@

0-9

Number keys 1 to 9 turn ON Layer Sets 1 to 9, respectively. 0 turns on layerset 10. The first layer of the layerset is made active. (If no layer set exists, nothing happens.)选择当前层,指定层必须是有的。

layerset_view@ # # is the number of the layerset to turn ON.

Ins

Pan to cursor location         按光标在面板中位置显示图形

+

Zoom in放大图形

view_zoomin@

-

Zoom out缩小图形

view_zoomout@

PgUp

Increase snap box size

加大目标选取框(以光标为中心)

setsnapdist@ # # in pixels setsnapdistdb@ # # in current user units (mils or mm)

PgDn

Decrease snap box size

减小目标洗取框(以光标为中心)

setsnapdist@ # # in pixels setsnapdistdb@ # # in current user units (mils or mm)

注:相关宏命令为命令提示框显示,热键按一次为0,按二次为1,三次为2

 Hotkeys that change during Edit commands在编辑命令状态下使用的热键

A

Select All选择全部图元

 

B

Toggle group display box mode/ghost mode指定成组显示模式或精灵模式

 

C

Toggle window mode crossing/non-crossing框选模式,交叉/不交叉选取

 

I

Toggle windowed selection inside/outside针对框内选取还是框外选取

edit_inside@ edit_outside@

M

Mirror a part during Add|Part and Quick Part, or Mirror the Reference Designator or Device Name during Build Part or in the Part Editor.器件镜相。只能在放置、编辑、制造器件使用

quickpart_mirror@

T

Rotate a part during Add|Part and Quick Part, or rotate the Reference Designator or Device Name during Build Part or in the Part Editor旋转器件,只能在放置、编辑、制造器件时使用

quickpart_turn@ partname_Turn@ setturn100angle@ # Sets the turn angle. # is 100 times the angle (650=6.5 degrees)

W

Enable group Window mode使用框选成组模式显示

 

 

Keyboard/Mouse Equivalents

Spacebar

Left mouse button相当于鼠标左键

,

Center mouse button (re-execute last command)相当于鼠标中键

Esc

Right mouse button相当于鼠标右键


(关闭本窗口)